Indoor air quality and sick building syndrome symptoms in administrative office at public university.

Sick Building Syndrome (SBS) is an illness among workers linked to time spent in a building. This study aimed to investigate the Indoor Air Quality (IAQ) and symptoms of Sick Building Syndrome (SBS) among administrative office workers. The IAQ parameters consist of ventilation performance indicators, and physical and chemical parameters were measured using specified instruments for three days during weekdays. The SBS symptoms were assessed by a questionnaire adopted from the Industry Code of Practice of Indoor Air Quality (ICOP-IAQ) 2010 among 19 employees from the office in East Coast Malaysia. Relationship between past symptoms and present symptoms which are draught (past symptoms) with feeling heavy headed (present symptoms) (r = 0.559, p < 0.05), room temperature too high (past symptoms) was highly correlated with feeling heavy headed (present symptoms) (r = 0.598, p < 0.01) and cough (present symptoms) (r = 0.596, p < 0.01). Room temperature (past symptoms) has a positive medium relationship with cough (present symptoms) (r = 0.477, p < 0.05) and scaling itching scalp or ears (present symptoms) has a relationship between stuffy bad air (r = 0.475, p < 0.05) and dry air (r = 0.536, p < 0.05). There was a significant association between RH with drowsiness (χ2 = 7.090, p = 0.049) and dizziness (χ2 = 7.090, p = 0.049). The association was found between temperature and SBS symptoms between temperature with headache (χ2 = 7.574, p = 0.051), feeling heavy-headed (χ2 = 8.090, p = 0.046), and skin rash itchiness (χ2 = 7.451, p = 0.044). Air movement also showed a positive association with symptoms of feeling heavy-headed (x2 = 8.726, p = 0.021). PM10 has positive significance with SBSS which are feeling heavy-headed (χ2 = 7.980, p = 0.023), and eyer's irritation (χ2 = 7.419, p = 0.038). The conclusion of this study showed that there were positive significant between temperature and relative humidity toward SBSS.

Spatial Distribution of Dermanyssus gallinae Infestations in Greece and Their Association with Ambient Temperature, Humidity, and Altitude.

Dermanyssus gallinae, the poultry red mite (PRM), is the most prevalent and harmful ectoparasite of laying hens globally. Although prevalence and risk factor studies can help veterinarians make decisions regarding farm treatments, relevant data are scarce. The present study investigated the prevalence and infestation severity of PRM in poultry farms across Greece and examined potential risk factors. AviVet traps were used to sample 84 farms (51 backyard, 33 industrial) over three years. Farm altitude, temperature, humidity, region, and production systems were assessed as potential risk factors with chi-square tests, initially for all the studied farms and then exclusively for backyard farms. The overall prevalence was 75.0% and was higher in backyard farms (80.4%) compared with industrial ones (66.7%), varying regionally from 66.7 to 90.9%. Altitude and temperature were not significant risk factors, but farms with humidity <60% had a lower infestation risk. Infestation severity did not significantly differ by risk factors. The poultry red mite is highly prevalent across Greek poultry production systems and regions. In the future, global warming, reduced acaricide options, and a ban on cage systems will all threaten a wider spatio-temporal distribution of the PRM, justifying the urgent need for effective monitoring and control methods to protect hen production and welfare and workers' health.

Highly sensitive humidity sensor based on composite film of partially reduced graphene oxide and bacterial cellulose.

Breathing is an important physiological activity of human body, which not only reflects the state of human movement, but also is one of the important health indicators. Breathing can change the concentration of water molecules, so monitoring humidity has gradually become a hot topic in modern research. In this study, a humidity sensing composite film with high sensitivity and short response time was made by using the mixture of graphene oxide (GO) and bacterial cellulose (BC) with simple dry film-forming method. L-ascorbic acid was used as reducing agent to reduce GO and improve the conductivity of GO/BC composite film (BG). The influence of different BC contents and the different reduction degree on the resistance change rate of composite film was investigated in details. The maximum resistance change rate of partially reduced BG humidity sensitive composite film reached up to 94%, and the response and recovery time were 13 s and 47 s respectively. Furthermore, the sensor shows obvious resistance change in noncontact sensing test and different breathing states. This kind of humidity sensitive film with fast response and high sensitivity has great potential in human health monitoring and noncontact sensing, and is of great significance in promoting health detection and intelligent life.

A Zeolitic Octahedral Metal Oxide with Ultrahigh Porosity for High-temperature and High-humidity Alkyne/Alkene Separation.

Zeolitic octahedral metal oxide is a newly synthesized all-inorganic zeolitic material and has been used for adsorption, separation, and catalysis. Herein, a new zeolitic octahedral metal oxide was synthesized and characterized. The porous framework was established through the assembly of [P2Mo13O50] clusters with PO4 linkers. Guest molecules occupied the framework, which could be removed through heat treatment, thereby opening the micropores. The pore characteristics were controlled by the cations within the micropore, enabling the adjustment of the interactions with alkynes and alkenes. This resulted in good separation performance of ethylene/acetylene and propylene/propyne even under high temperature and humidity conditions. The high stability of the material enabled the efficient recovery and reuse without discernible loss in the separation performance. Due to the relatively weak interaction between the adsorbed alkyne and the framework, the adsorbent facilitated the recovery of a highly pure alkyne. This feature enhances the practical applicability of the material in various industrial processes.

Implications of Defect Density and Polymer Interactions for CO2 Capture on Amine-Functionalized MIL-101(Cr).

Rising anthropogenic carbon emissions have dire environmental consequences, necessitating remediative approaches, which includes use of solid sorbents. Here, aminopolymers (poly(ethylenimine) (PEI) and poly(propylenimineimine) (PPI)) are supported within solid mesoporous MIL-101(Cr) to examine effects of support defect density on aminopolymer-MOF interactions for CO2 uptake and stability during uptake-regeneration cycles. Using simulated flue gas (10 % CO2 in He), MIL-101(Cr)-ρhigh (higher defect density) shows 33 % higher uptake capacity per gram adsorbent than MIL-101(Cr)-ρlow (lower defect density) at 308 K, consistent with increased availability of undercoordinated Cr adsorption sites at missing linker defects. Increasing aminopolymer weight loadings (10-50 wt.%) within MIL-101(Cr)-ρlow and MIL-101(Cr)-ρhigh increases amine efficiencies and CO2 uptake capacities relative to bare MOFs, though both incur CO2 diffusion limitations through confined, viscous polymer phases at higher (40-50 wt.%) loadings. Benchmarked against SBA-15, lower polymer packing densities (PPI > PEI), weaker and less abundant van der Waals interactions between aminopolymers and pore walls, and open framework topology increase amine efficiencies. Interactions between amines and Cr defect sites incur amine efficiency losses but grant higher thermal and oxidative stability during uptake-regeneration cycling. Finally, >25 % higher CO2 uptake capacities are achieved for aminopolymer/MIL-101(Cr)-ρhigh under humid conditions, demonstrating promise for realistic applications.

Biological, physical and morphological factors for the programming of a novel microbial hygromorphic material.

The urgency for energy efficient, responsive architectures has propelled smart material development to the forefront of scientific and architectural research. This paper explores biological, physical, and morphological factors influencing the programming of a novel microbial-based smart hybrid material which is responsive to changes in environmental humidity. Hygromorphs respond passively, without energy input, by expanding in high humidity and contracting in low humidity.Bacillus subtilisdevelops environmentally robust, hygromorphic spores which may be harnessed within a bilayer to generate a deflection response with potential for programmability. The bacterial spore-based hygromorph biocomposites (HBCs) were developed and aggregated to enable them to open and close apertures and demonstrate programmable responses to changes in environmental humidity. This study spans many fields including microbiology, materials science, design, fabrication and architectural technology, working at multiple scales from single cells to 'bench-top' prototype.Exploration of biological factors at cellular and ultracellular levels enabled optimisation of growth and sporulation conditions to biologically preprogramme optimum spore hygromorphic response and yield. Material explorations revealed physical factors influencing biomechanics, preprogramming shape and response complexity through fabrication and inert substrate interactions, to produce a palette of HBCs. Morphological aggregation was designed to harness and scale-up the HBC palette into programmable humidity responsive aperture openings. This culminated in pilot performance testing of a humidity-responsive ventilation panel fabricated with aggregatedBacillusHBCs as a bench-top prototype and suggests potential for this novel biotechnology to be further developed.

Dysnatremia in a changing climate: A global systematic review of the association between serum sodium and ambient temperature.

OBJECTIVE: Both hyponatremia and hypernatremia have been reported to occur more frequently with higher ambient temperatures, although the underlying mechanisms are not well understood. Global temperatures are rising due to climate change, which may impact the incidence of dysnatremia worldwide. We aimed to identify, collate and critically appraise studies analyzing the relationship between climate measures (outdoor temperature, humidity) and serum sodium concentrations. DESIGN: Systematic review, reported in accordance with PRISMA guidelines. METHODS: MEDLINE and Embase were searched with relevant key terms. Studies assessing the effect on serum sodium measurement of elevated temperature or humidity versus a comparator were included. RESULTS: Of 1466 potentially relevant studies, 34 met inclusion criteria, originating from 23 countries spanning all inhabited continents. The majority (30 of 34, 88%) reported a significant association between outdoor temperature and dysnatremia, predominantly lower serum sodium with increased ambient temperature. Humidity had a less consistent effect. Individuals aged above 65 years, children, those taking diuretics and antidepressants, those with chronic renal impairment or those undertaking physical exertion had increased vulnerability to heat-associated dysnatremia. The risk of bias was assessed to be high in all but four studies. CONCLUSIONS: Higher ambient temperature is consistently associated with an increased incidence of hyponatremia. We infer that hyponatremia presentations are likely to rise with increasing global temperatures and the frequency of extreme heat events secondary to climate change. Evidence-based public health messages, clinician education and reduction in fossil fuel consumption are necessary to reduce the expected burden on healthcare services worldwide.

Effects of Heat Stress on the Laying Performance, Egg Quality, and Physiological Response of Laying Hens.

As high temperature and relative humidity (RH) are the main environmental factors causing heat stress, the temperature-humidity index (THI) serves as an indicator of heat stress in livestock animals. This study aimed to determine the effects of heat stress on the laying performance, physiological responses, egg quality, and blood profile of laying hens by subjecting them to environmental conditions with varying THI levels (68-85) for 28 days. The indicators of laying performance, such as feed intake (-30%) and egg production rate (-11%), significantly decreased in the hens exposed to severe heat stress (33 °C, 66% RH) compared to those exposed to thermoneutral conditions (21 °C, 68% RH). Moreover, severe heat stress reduced the egg yolk color, eggshell thickness and strength, and Haugh units of the eggs produced by the laying hens. Furthermore, a significant increase in serum K+ and a decrease in Na+ levels were observed in the hens subjected to severe heat stress compared with those under thermoneutral conditions. Our results indicate that heat stress alters the physiological responses and metabolism of laying hens, resulting in a lower egg quality and production rate.

Identification of film-based formulations that move mRNA lipid nanoparticles out of the freezer.

COVID-19 vaccines consisting of mRNA lipid nanoparticles (LNPs) encoding the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike protein antigen protected millions of people from severe disease; however, they must be stored frozen prior to use. The objective of this study was to evaluate the compatibility and stability of mRNA LNPs within a polymer-based film matrix. An optimized formulation of polymer base, glycerol, surfactants, and PEGylated lipid that prevents damage to the LNP due to physical changes during the film-forming process (osmotic stress, surface tension, spatial stress, and water loss) was identified. Surfactants added to LNP stock prior to mixing with other film components contributed to this effect. Formulations prepared at pH ≥ 8.5 extended transfection efficiency beyond 4 weeks at 4°C when combined with known nucleic acid stabilizers. mRNA LNPs were most stable in films when manufactured in an environment of ∼50% relative humidity. The optimized formulation offers 16-week stability at 4°C.

Effects of ambient temperature, relative humidity and absolute humidity on risk of nasopharyngeal carcinoma in China.

Nasopharyngeal carcinoma (NPC) has a unique geographic distribution. It is unknown whether meteorological factors are related to the incidence of NPC. To investigate the effect of ambient temperature, relative humidity (RH), and absolute humidity (AH) on the incidence of NPC, we collected the incidence rate of NPC in 2016 and meteorological data from 2006 to 2016 from 484 cities and counties across 31 provinces in China. Generalized additive models with quasi-Poisson regression and generalized linear models with natural cubic splines were employed respectively to elucidate the nonlinear relationships and specify the partial linear relationships. Subgroup and interactive analysis were also conducted. Temperature (R2 = 0.68, p < .001), RH (R2 = 0.47, p < .001), and AH (R2 = 0.70, p < .001) exhibited nonlinear correlations with NPC incidence rate. The risk of NPC incidence increased by 20.3% (95% confidence intervals [CI]: [18.9%, 21.7%]) per 1°C increase in temperature, by 6.3% (95% CI: [5.3%, 7.2%]) per 1% increase in RH, and by 32.2% (95% CI: [30.7%, 33.7%]) per 1 g/m3 increase in AH, between their the 25th and the 99th percentiles. In addition, the combination of low temperature and low RH was also related to increased risk (relative risk: 1.60, 95% CI: [1.18, 2.17]). Males and eastern or rural populations tended to be more vulnerable. In summary, this study suggests that ambient temperature, RH, and particularly AH are associated with the risk of NPC incidence.

Anopheles aquatic development kinetic and adults' longevity through different seasons in laboratory and semi-field conditions in Burkina Faso.

ABSTRACT: BACKGROUND: Anopheles mosquitoes are ectothermic and involved in numerous pathogen transmissions. Their life history traits are influenced by several environmental factors such as temperature, relative humidity and photoperiodicity. Despite extensive investigations of these environmental conditions on vector population ecology, their impact on the different life stages of Anopheles at different seasons in the year remains poorly explored. This study reports the potential impact of these abiotic factors on the immature and adult stages of Anopheles gambiae sensu lato during different seasons. METHODS: Environmental conditions were simulated in the laboratory using incubators to mimic the environmental conditions of two important periods of the year in Burkina Faso: the peak of rainy season (August) and the onset of dry season (December). Eggs from wild An. coluzzii and An. gambiae s.l. were reared separately under each environmental condition. For Anopheles coluzzii or An. gambiae s.l., eggs were equally divided into two groups assigned to the two experimental conditions. Four replicates were carried out for this experiment. Then, egg hatching rate, pupation rate, larval development time, larva-to-pupae development time, adult emergence dynamics and longevity of Anopheles were evaluated. Also, pupae-to-adult development time from wild L3 and L4 Anopheles larvae was estimated under semi-field conditions in December. RESULTS: A better egg hatching rate was recorded overall with conditions mimicking the onset of the dry season compared to the peak of the rainy season. Larval development time and longevity of An. gambiae s.l. female were significantly longer at the onset of the dry season compared than at the peak of the rainy season. Adult emergence was spread over 48 and 96 h at the peak of the rainy season and onset of dry season conditions respectively. This 96h duration in the controlled conditions of December was also observed in the semi-field conditions in December. CONCLUSIONS: The impact of temperature and relative humidity on immature stages and longevity of An. gambiae s.l. adult females differed under both conditions. These findings contribute to a better understanding of vector population dynamics throughout different seasons of the year and may facilitate tailoring of control strategies.

Integrated drying model of lychee as a function of temperature and relative humidity.

Drying is a universal method applied for food preservation. To date, several models have been developed to evaluate drying kinetics. In this study, lychee was dried employing a hot air dryer, and the drying kinetics was evaluated by comparing the Newtonian model, Henderson and Pabis model, Page model, and Logarithmic model. However, temperature and relative humidity, the key driving forces for drying kinetics, are not considered by these models. Thus, an integrated drying model, as a function of temperature and relative humidity, was developed to predict the hot air-drying kinetics and mass transfer phenomena of lychee followed by the calibration and validation of the model with independent experimental datasets. The model validation consisted of Nash- Sutcliffe model coefficient (E), coefficient of determination (R2) and index of agreement (d) and all of them were found close to 1 indicating perfect model fit. Besides, the developed model was applied for process optimization and scenario analysis. The drying rate constant was found as a function of temperature and relative humidity that was high at high temperature and low relative humidity. Interestingly, temperature showed a higher effect on the drying rate constant compared to relative humidity. Overall, the present study will open a new window to developing further drying model of lychee to optimize quality its quality parameters.

Metabarcode insights into the airborne fungal diversity in the indoor and outdoor environments in archives from Yunnan, Southwestern China.

Monitoring dynamics of airborne fungal species and controlling of harmful ones are of vital importance to conservation of cultural relics. However, the evaluation of air quality and the community structure characteristics of microorganisms, especially fungi, in the atmosphere of archives is in a stage of continuous exploration though more than 4,000 archives were constructed in China. Seventy-two air samples were collected in this study under different spatial and weather conditions from the archives of Kunming Medical University, located in the Kunming metropolitan area, Yunnan province, southwestern China. A total of 22 airborne fungal classes, 160 genera and 699 ASVs were identified, the species diversity is on the rise with the strengthening of air circulation with the outside space, and thus the intensive energy metabolism and activity were found in the spaces with window and sunny weather, except for the higher lipid synthesis of indoor samples than that of outdoor ones. Furthermore, there were significant differences in fungal community composition and abundance between sunny and rainy weathers. A considerable number of species have been identified as indicator in various environmental and weather conditions of the archives, and temperature and humidity were thought to have significant correlations with the abundance of these species. Meanwhile, Cladosporium and Alternaria were the dominant genera here, which may pose a threat to the health of archive professionals. Therefore, monitoring and controlling the growth of these fungal species is crucial for both conservation of paper records and health of archive professionals.

Surface charge manipulation for improved humidity sensing of TEMPO-oxidized cellulose nanofibrils.

Cellulose-based humidity sensors have attracted great research interest due to their hydrophilicity, biodegradability, and low cost. However, they still suffer from relatively low humidity sensitivity. Due to the presence of negatively charged carboxylate groups, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibril (CNF) exhibits enhanced hydrophilicity and ion conductivity, which is considered a promising candidate for humidity sensing. In this work, we developed a facile strategy to improve the humidity sensitivity of CNF films by regulating their surface charge density. With the increase in surface charge density, both water uptake and charge carrier densities of the CNF films can be improved, enabling a humidity sensitivity of up to 44.5 % (%RH)-1, higher than that of most polymer-based humidity sensors reported in the literature. Meanwhile, the sensor also showed good linearity (R2 = 0.998) over the 15-75 % RH at 1 kHz. With these features, the CNF film was further demonstrated for applications in noncontact sensing, such as human respiration, moisture on fingertips, and water leakage, indicating the great potential of CNF film in humidity monitoring.

A tough, reversible and highly sensitive humidity actuator based on cellulose nanofiber films by intercalation modulated plasticization.

Cellulose nanofiber was an ideal candidate for humidity actuators based on its wide availability, biocompatibility and excellent hydrophilicity. However, conventional cellulose nanofiber-based actuators faced challenges like poor water resistance, flexibility, and sensitivity. Herein, water-resistant, flexible, and highly sensitive cross-linked cellulose nanofibers (CCNF) single-layer humidity actuators with remarkable reversible humidity responsiveness were prepared by combining the green click chemistry modification and intercalation modulated plasticization (IMP). The incorporation of phenyl ring and the crosslinked network structure in CCNF films contributed to its improved water resistance and mechanical properties (with a stress increased from 85.9 ± 3.1 MPa to 141.2 ± 21.5 MPa). SEM analysis confirmed enhanced interlaminar sliding properties facilitated by IMP. This resulted in increased flexibility and toughness of CCNF films, with a strain of 11.5 % and toughness of 9.9 MJ/m3. These improvements efficiently enhanced humidity sensitivity for cellulose nanofiber, with a 4.8-fold increase in bending curvature and a response time of only 3.4 ± 0.1 s. Finally, the good humidity sensitivity of modified CNF can be easily imparted to carbon nanotubes (CNTs) via simple self-assembly method, thus leading to a high-performance humidity-responsive actuator. The click chemistry modification and IMP offer a new avenue to fabricate tough, reversible and highly sensitive humidity actuator based on cellulose nanofiber.

Optimizing Greenhouse Design with Miniature Models and IoT (Internet of Things) Technology-A Real-Time Monitoring Approach.

The market for smart greenhouses has been valued at USD 1.77 billion in 2022 and is expected to grow to 3.39 billion by 2030. In order to make this more efficient, with the help of Internet of Things (IoT) technology, it is desired to eliminate the problem of traditional agriculture, which has poor monitoring and accuracy control of the parameters of a culture. Climate control decisions in a greenhouse are made based on parameter monitoring systems, which can be remotely controlled. Instead of this adjustment of the measured parameters, it would be preferable from the point of view of energy consumption that they should be calculated at optimal values from the design phase of the greenhouse. For this reason, it would be better to perform an energy simulation of the greenhouse first. For the study carried out in this work, a small greenhouse (mini-greenhouse) was built. It was equipped with an IoT sensor system, which measured indoor climate parameters and could send data to the cloud for future recording and processing. A simplified mathematical model of the heat balance was established, and the measured internal parameters of the mini-greenhouse were compared with those obtained from the simulation. After validating the mathematical model of the mini-greenhouse, this paper aimed to find the optimal position for placing a normal-sized greenhouse. For this, several possible locations and orientations of the greenhouse were compared by running the mathematical model, with which the most unfavorable positions could be eliminated. Then, some considerably cheaper "mini-greenhouses" were made and placed in the locations with the desired orientations. Using sensor systems and technologies similar to those presented in this work, the parameters from all mini-greenhouses can be monitored in real time. This real-time monitoring allows for the simultaneous analysis of all greenhouses, without the disadvantages of data collection directly in the field, with all data being recorded in the cloud and other IoT-specific advantages being made use of. In the end, we can choose the optimal solution for the location of a real-size greenhouse.

Climatically Accelerated Material Processes Determining the Long-Term Reliability of Light-Emitting Diodes.

LEDs (Light-Emitting Diodes) are widely applied not only in decorative illumination but also in everyday lighting in buildings, flats, public areas, and automotive fields. These application areas often mean harsh environments, for example, regarding the humidity content of the surrounding air: besides outdoor and automotive illumination, even the household use cases (kitchen, bathroom, cellar) may represent extreme temperature and humidity variations (often reaching relative humidity levels close to 100%) for these devices; thus, their reliability behaviour in such circumstances should be better understood. Thermally activated processes were studied in several previous publications, but less information is available regarding high-humidity environmental tests. Moisture and temperature ageing tests with appropriate environmental parameter settings were performed as accelerated lifetime tests to investigate not only the effect of temperature but also that of humidity on the ageing and reliability of LED packages containing RGB (red green blue) chips and phosphor-converted white (pcW) LEDs. The ageing was followed not only through monitoring optical/electrical/spectral parameters but also with material analysis. Moisture-material interaction models were proposed and set up. It was found that humidity-accelerated ageing processes are more severe than expected from previous assumptions. RGB and pcW LEDs showed strongly different behaviour.

Environmental Temperature, Other Climatic Variables, and Cardiometabolic Profile in Acute Myocardial Infarction.

Objectives: To evaluate CV profiles, periprocedural complications, and in-hospital mortality in acute myocardial infarction (AMI) according to climate. Methods: Data from 2478 AMI patients (1779 men; mean age 67 ∓ 13 years; Pasquinucci Hospital ICU, Massa, Italy; 2007-2018) were retrospectively analyzed according to climate (LAMMA Consortium; Firenze, Italy) by using three approaches as follows: (1) annual warm (May-October) and cold (November-April) periods; (2) warm and cold extremes of the two periods; and (3) warm and cold extremes for each month of the two periods. Results: All approaches highlighted a higher percentage of AMI hospitalization for patients with adverse CV profiles in relation to low temperatures, or higher periprocedural complications and in-hospital deaths. In warmer times of the cold periods, there were fewer admissions of dyslipidemic patients. During warm periods, progressive heat anomalies were characterized by more smoker (approaches 2 and 3) and young AMI patient (approach 3) admissions, whereas cooler times (approach 3) evidenced a reduced hospitalization of diabetic and dyslipidemic patients. No significant effects were observed for the heat index and light circulation. Conclusions: Although largely overlapping, different approaches identify patient subgroups with different CV risk factors at higher AMI admission risk and adverse short-term outcomes. These data retain potential implications regarding pathophysiological mechanisms of AMI and its prevention.

Field evidence of brown carbon absorption enhancement linked to organic nitrogen formation in Indo-Gangetic Plain.

Atmospheric brown carbon (BrC), a short-lived climate forcer, absorbs solar radiation and is a substantial contributor to the warming of the Earth's atmosphere. BrC composition, its absorption properties, and their evolution are poorly represented in climate models, especially during atmospheric aqueous events such as fog and clouds. These aqueous events, especially fog, are quite prevalent during wintertime in Indo-Gangetic Plain (IGP) and involve several stages (e.g., activation, formation, and dissipation, etc.), resulting in a large variation of relative humidity (RH) in the atmosphere. The huge RH variability allowed us to examine the evolution of water-soluble brown carbon (WS-BrC) diurnally and as a function of aerosol liquid water content (ALWC) and RH in this study. We explored links between the evolution of WS-BrC mass absorption efficiency at 365 nm (MAEWS-BrC-365) and chemical characteristics, viz., low-volatility organics and water-soluble organic nitrogen (WSON) to water-soluble organic carbon (WSOC) ratio (org-N/C), in the field (at Kanpur in central IGP) for the first time worldwide. We observed that WSON formation governed enhancement in MAEWS-BrC-365 diurnally (except during the afternoon) in the IGP. During the afternoon, the WS-BrC photochemical bleaching dwarfed the absorption enhancement caused by WSON formation. Further, both MAEWS-BrC-365 and org-N/C ratio increased with a decrease in ALWC and RH in this study, signifying that evaporation of fog droplets or bulk aerosol particles accelerated the formation of nitrogen-containing organic chromophores, resulting in the enhancement of WS-BrC absorptivity. The direct radiative forcing of WS-BrC relative to that of elemental carbon (EC) was ~19 % during wintertime in Kanpur, and ~ 40 % of this contribution was in the UV-region. These findings highlight the importance of further examining the links between the evolution of BrC absorption behavior and chemical composition in the field and incorporating it in the BrC framework of climate models to constrain the predictions.

Influence of Service Conditions and Mix Design on the Physical-Mechanical Properties of Roller-Compacted Concrete for Pavement.

This research focuses on the behavior of roller-compacted concrete (RCC) used in pavements, which are prone to deterioration affecting their performance. These deteriorations result from various causes, including traffic load, errors during construction, mix design, and ambient conditions. Among these, ambient conditions could lead to a marked variable impact on material behavior and durability depending on the conditions associated with each region. Accordingly, this study aims to deepen the understanding of the effect, which a broader range of ambient conditions and different mix designs have on the physical and mechanical properties of RCC. Measurements such as the amount of water vapor per kilogram of air were used to apply the findings comprehensively. The RCC analysis encompassed experimentation with different compositions, altering the cement water ratio amount, and adding a superplasticizer. The impact of curing on the materials was evaluated before subjecting them to various humidity and temperature conditions. Laboratory tests were conducted to measure performance, including moisture, shrinkage, compressive strength, and the progression of flexural fracture resistance over curing periods of up to 90 days. The results revealed a logarithmic correlation between shrinkage and ambient humidity, which is the most determining factor in performance. Mix optimization through increased cement and reduced water enhanced the tensile strength of the material. Furthermore, the curing process was confirmed to increase resistance to shrinkage, especially in the long term, establishing it as a crucial element for the structural stability of RCC, which is relatively insensitive to variations in ambient conditions.